ASSEMBLY INSTRUCTIONS FOR THE EFOILSOLUTIONS FLITEBOARD / AXIS ADAPTER
These instructions apply to both Black and Red Series Axis Adapters
- Temporarily connect the wing to the adapter, using the four bolts provided. Note: The four bolts are longer than the standard Axis bolts. Verify that the bolts fully engage with the aluminum plate but do not protrude past the plate. Unscrew and remove the wing from the adapter.
- Connect the adapter to the Fliteboard Efoil with the three M6 x 20mm bolts provided.
- Re-connect the Axis wing to the Adapter.
- Shimming: Add -1, -2, or both (-3) between the plate and efoil to decrease the nose-up pressure (to point the board nose down). Use the “+” shims to increase nose pressure. NOTE THAT SHIMMING MAY REQUIRE LONGER BOLT(S).
Please don’t hesitate to contact us at support@efoilsolutions.com or call us at (626) 888-2664 with any questions.