ASSEMBLY INSTRUCTIONS FOR THE EFOILSOLUTIONS WAYDOO / AXIS ADAPTER
These instructions apply to both Black and Red Series Axis Adapters
- Temporarily connect the wing to the adapter, using the four bolts provided. Note: The four bolts are longer than the standard Axis bolts. Verify that the bolts fully engage with the aluminum plate but do not protrude past the plate. Unscrew and remove the wing from the adapter.
- Connect the adapter to the Waydoo Efoil with the two M6 x 20mm bolts provided.
- Re-connect the Axis wing to the Adapter.
-
Shimming: Add -1, -2, or both (-3) between the plate and efoil to decrease the nose-up pressure (to point the board nose down). Use the “+” shims to increase nose pressure. NOTE THAT SHIMMING MAY REQUIRE LONGER BOLT(S).
- Spacer Shim
Some Waydoo connection plates may have a protruding bolt plate.
Use this shim ONLY if your the surface plate is not completely flush and the adapter aluminum plates rocks when in contact with the Waydoo plate.
Please don’t hesitate to contact us at support@efoilsolutions.com or call us at (626) 888-2664 with any questions.