ASSEMBLY INSTRUCTIONS FOR THE EFOILSOLUTIONS WAYDOO / SABFOIL ADAPTER


ASSEMBLY INSTRUCTIONS FOR THE EFOILSOLUTIONS WAYDOO / SABFOIL ADAPTER

  1. Optional: If using M8 bolts to connect to the Sabfoil wing (not provided), remove three M6 to M8 threaded inserts.
  2. Connect the adapter to the Waydoo Efoil with the two M6 x 20mm bolts provided.
  3. Connect the Sabfoil wing to the Adapter. Note: Bolts for this connection are longer than the standard bolt set.  The back and middle bolts should not protrude above the metal plate. 
  4. Shimming: Add -1, -2, or both (-3) between the plate and efoil to decrease the nose-up pressure (to point the board nose down).  Use the “+” shims to increase nose pressure.  NOTE THAT SHIMMING MAY REQUIRE LONGER BOLT(S).
  5. Spacer Shim
    Some Waydoo connection plates may have a protruding bolt plate.

    Use this shim ONLY if your the surface plate is not completely flush and the adapter aluminum plates rocks when in contact with the Waydoo plate.
Please don’t hesitate to contact us at support@efoilsolutions.com or call us at (626) 888-2664 with any questions.